小弟求助，急！！！

If we do end up using the SOIC chips, I would suggest masking off the surface-mount area for the chip so that we soldering cam be used to attach all the through-hole components, resistors, capacitors and transistors.??Then remove the mask and place the microprocessor carefully in place using solder-flux paste and attach it as a separate operation.??The 6-pin header (2 rows of 3 pins) which could not be used before because the pin connections were reversed, can now be employed with the circuit routing done as a mirror image.??Then the??conductor routing will allow the use of the header with the pin connections correct. The header will allow the Smart Cable to plug into the board to program the chips in place once the board is assembled. (You don't need to pre-program the chips using zero insertion force socket.) 请帮我翻译这段话大概客户是什么意思。背景是我们想找DIP封装的芯片，但是找不到，想临时改变成SOIC的芯片。