谁能帮我看看这个怎么翻译啊，谢谢。在线等。

6.? ? ? ? 液筒传动采用斜齿轮传动，最多10个工位需要一台减速机和电机，电机在10个工位的中间驱动，镀锌液筒转速可调。 7.? ? ? ? 镀锌冷却系统采用1台冷冻机组对配置槽内的槽液进行冷却，配置槽与3个镀槽间甩水泵进行循环，每个镀槽独立配置过滤机。 8.? ? ? ? 融锌槽可以放置两个融锌蓝。融锌槽液通过过滤机可以与配置循环。 9.? ? ? ? 配置槽与融锌槽均带有手动槽盖和抽风。 10.? ? ? ? 液筒下料后直接输送至甩干机，甩干机顶部设置悬臂的燃烧器进行热风吹干。

翻译

2014-05-27 256阅读

问题/讨论

我要向AI提问

AI回答：

6. The liquid cylinder is driven by bevel gear transmission. A reducer and a motor are required for up to 10 stations. The motor drives at the center of 10 stations, and the speed of the galvanized liquid cylinder can be adjusted.

7. The galvanized cooling system adopts one chiller unit to cool the liquid in the slot. The slot is circulated by a water pump between the configuration slot and three galvanizing tanks, and each galvanizing tank is independently equipped with a filter.

8. Two zinc melting pots can be placed in the zinc melting tank. The zinc melting tank liquid can be circulated by the filter.

9. Both the configuration slot and the zinc melting tank are equipped with manual slot covers and exhaust fans.

10. After the liquid cylinder is discharged, it is directly conveyed to the centrifugal dryer. A cantilevered burner is set on the top of the centrifugal dryer for hot air drying.

2023-05-23

追问：

热门悬赏