我有个斯罗维尼亚的客户,要我们的机器,我们的产品没CE,他说要我们出具个CE符合性申明就可以了,我问过认证公司,说是可以出具的,但问题是他上面还要求我们的机器上贴一个带有CE标志的牌牌,这个老板说不行的,我也觉得贴牌的话可能行不通,我们的机器是属于食品机械。大家给出出主意啊!
大家帮我看看这个文件,是客户发过来的原始文件。
ANNEX II
Declarations
1. CONTENT
A. EC DECLARATION OF CONFORMITY OF THE MACHINERY
This declaration and translations thereof must be drawn up under the same
conditions as the instructions (see Annex I, section 1.7.4.1(a) and (b)), and
must be typewritten or else handwritten in capital letters.
This declaration relates exclusively to the machinery in the state in which it
was placed on the market, and excludes components which are added and/or
operations carried out subsequently by the final user.
The EC declaration of conformity must contain the following particulars:
1. business name and full address of the manufacturer and, where appropriate,
his authorised representative;
2. name and address of the person authorised to compile the technical file,
who must be established in the Community;
3. description and identification of the machinery, including generic
denomination, function, model, type, serial number and commercial
name;
4. a sentence expressly declaring that the machinery fulfils all the relevant
provisions of this Directive and where appropriate, a similar sentence
declaring the conformity with other Directives and/or relevant provisions
with which the machinery complies. These references must be those of
the texts published in the Official Journal of the European Union;
5. where appropriate, the name, address and identification number of the
notified body which carried out the EC type-examination referred to in
Annex IX and the number of the EC type-examination certificate;
6. where appropriate, the name, address and identification number of the
notified body which approved the full quality assurance system referred
to in Annex X;
7. where appropriate, a reference to the harmonised standards used, as
referred to in Article 7(2);
8. where appropriate, the reference to other technical standards and specifications
used;
9. the place and date of the declaration;
10. the identity and signature of the person empowered to draw up the
declaration on behalf of the manufacturer or his authorised representative.
B. DECLARATION OF INCORPORATION OF PARTLY COMPLETED
MACHINERY
This declaration and translations thereof must be drawn up under the same
conditions as the instructions (see Annex 1, section 1.7.4.1(a) and (b)), and
must be typewritten or else handwritten in capital letters.
The declaration of incorporation must contain the following particulars:
1. business name and full address of the manufacturer of the partly
completed machinery and, where appropriate, his authorised representative;
2. name and address of the person authorised to compile the relevant
technical documentation, who must be established in the Community;
3. description and identification of the partly completed machinery
including generic denomination, function, model, type, serial number
and commercial name;
4. a sentence declaring which essential requirements of this Directive are
applied and fulfilled and that the relevant technical documentation is
compiled in accordance with part B of Annex VII, and, where appro-
priate, a sentence declaring the conformity of the partly completed
machinery with other relevant Directives. These references must be
those of the texts published in the Official Journal of the European
Union;
5. an undertaking to transmit, in response to a reasoned request by the
national authorities, relevant information on the partly completed
machinery. This shall include the method of transmission and shall be
without prejudice to the intellectual property rights of the manufacturer
of the partly completed machinery;
6. a[收起]