Amy,
I would like to proceed but change the quantities.
1. 5 sets of the 14Amp controller with 790 display
2. 10 sets of 22Amp controller with your LCD display.
3. 5 sets or 22Amp controller with 790 display( black connectors on 790)
Resend PI with revised quantity and shipping cost. Please indicate the completion date and the warranty.
I will send the wire transfer tomorrow.
Attached are the controller pin outs. Let me know if you he any question.
(接上封邮件。。劳驾兄弟姐妹们抬抬眼找找哈,嘻嘻嘻)
Amy,
1. I am not sure about your information.
Let me try to see if I understand this. You do not he a controller design for 36V with 22 Amp. So I he to select from the standard options and that is 48V for 350W motor
2. Sorry for mis information. its 790.
If i select 36V 16Amp controller the table you attached shows that its for a 250W motor. Will it run the 350W motor? Will it still be optimum performance?
Please note the two small connector so I can install on my existing ebikes. Please also send me price quote of your power selector LCD module with MPH speed, Odometer, power gauge and selector.
Thanks
R****
偶滴回复
Dear R*****,
Thanks for your time reading.
1.The connector you mentioned is one of our normal connectors,otherwise,
We could provided you with any kind of connector that you need.
We are manufacturers,based on quality controller standard,we could do some change.
Amy,
Please see if this is your controller.
I need to order some of these ASAP.
Is there a higher Amp (22) ailable?
This should work with the 760 module.
P